The use note of coordinate grinder and common breakdown

  • Time:
  • Click:186
  • source:FINKEL CNC Machining
The use note of coordinate grinder reachs common breakdown summary: The besmear cloth craft of presswork glazing summarizes 703 modelling machine operating rules is new-style technology of cutting tool identifying strengthens tool industry to serve ability to raise research and development of our country of CNC Machining efficiency the choice of system of numerical control of machining center of MC340 of system of timing of successful and new-style electromotor and configuration form the relation between tolerancepublic errand and replace application (fall) solve tool industry.

Use note 1.

The machine tool when 1 machine tool is used at nice work must install temperature relative humidity change of room temperature of radiate of solar and point-blank local heat source avoids to be more than inside 705% constant conservatory 0.

5 hours 1.

Foundation of 2 machine tools is had shock-proof 1.

3 receive a machine tool to compress air to filter dry air compresses temperature of air pressurization dew point under 1.

Size of spare parts of room of constant temperature of 4 treatment spare parts.

1.

　 of use note 　 1.

1 machine tool is used at tall nicety is machined, the machine tool must be installed 20 ℃ ± is in temperature 1 ℃ , relative humidity not prep above the constant temperature of 705% is indoor, should avoid the radiate of heat source of ministry of solar and point-blank standoff. Room temperature change should not is more than 0.

5 ℃ / 4 hours. 1.

Foundation of 2 machine tools should have shock-proof channel. 1.

The 3 compression that receive a machine tool air should be the dry air that the course filters, compress temperature of airy pressurization dew point to answer under 10 ℃ . 1.

After room of the 4 constant temperature that be entered by carry of treatment spare parts, inspect spare parts size to need isothermal 2~3 hour, needs measurement tool should beforehand isothermal, ability is machined and measure next. 1.

5 workpiece weight must not be more than workbench the biggest load. 1.

6 be not answered to be contacted with working mesa directly by treatment spare parts, damage in case workbench face. 1.

The hot stable device of axes of main shaft of machine tool of stock of 7 machine tools () of vulcanize countervail system. This is an electron system, the cold hot temperature that because machine tool movement is caused,in order to reduces differs the wheelhead case that cause to heat up the influence of displacement, assure to machine precision. When stable device leaves factory, heat has been adjusted, the user do not be changed at will. When use, must not cut off the power source of this device. For this electronic-controlled alone mains switch is set on box, although commute that evening,this power source also must not be cut off, if the machine tool cuts off this circuit power source because of working more for long, make the machine tool already cooled when room temperature, before reentry works all right, should put through ahead of schedule the power source of this device, put through time not less than 4 hours, make the machine tool is in hot condition, just can undertake machining next. 1.

8 after switching on the mobile phone everyday and the machine tool is in cut off the power suddenly after restart, each axis all should undertake answering 0. 2.

Of common breakdown eliminate reason of phenomenon of methodological 　 serial number to eliminate methodological 　 　 2.

1 workbench shakes clearance of worm worm wheel adjusts worm annulus clearance to be less than greatly too 0.

　 of 01mm 　 2.

2c axis clearance crosses switch of big S axis to exceed 60 to turn to C axis rotate speed 　 of 　 of clearance of readjust ball spline 2.

3 wheelhead bearing damages oily mirage lubricates to give oily thing inadequately too quickly implement cheer 　 　 2.

4 wheelhead electric machinery does not turn brush contact is undesirable change brush CNC Milling